New Y0.045Ni0.045Fe2.91O4 nanowires decorated over mesoporous silica for crystal violet removal: Response surface methodology optimization, kinetics, and isothermal studies

Abstract

Recently, there has been considerable interest in developing an efficient, easily separable, cost-effective, and environmentally friendly catalyst for treating toxic environmental pollutants. In this study, we successfully designed yttrium–nickel-doped magnetite nanowires (Y0.045Ni0.045Fe2.91O4) and their mesoporous silica (MS)-coated composite (Y0.045Ni0.045Fe2.91O4/MS) using a simple coprecipitation method. The resulting composite demonstrated effective adsorption and photocatalytic degradation of crystal violet (CV) dye under sunlight. Various instrumental characterization techniques were employed to assess the nanowires' morphological, chemical, and surface functional properties and their composite. The existence of metal–oxygen bonds in Y0.045Ni0.045Fe2.91O4 within the 500–800 cm−1 range was verified through FTIR analysis. According to the Brunauer–Emmett–Teller analysis, the composite exhibited a surface area of 285 m2/g, a pore volume of 0.436 cm³/g, and an average pore width of 5 nm. The composite's high surface area and mesoporous nature underscored its porous structure, confirming its enhanced adsorption capacity for contaminants. High resolution XPS spectrum justified the presence of surface silanol groups (Si–OH) which are responsible for adsorption phenomena. Photocatalytic experiments revealed that Y0.045Ni0.045Fe2.91O4 nanowires and their composites achieved 89% and 90% degradation rates for CV dye within 60 and 10 min, respectively. The removal efficiency was assessed under optimized conditions of pH (8), dose (15 mg), time (60 and 10 min), and concentration (10 mg/L). Statistical analysis revealed that pH significantly impacted CV dye removal because functional group activation varied at different pH values. To elucidate the adsorption mechanism and kinetics, the Temkin isotherm model and pseudo-second-order kinetics model (R2 = 1.996 mg min−1) were the best fit for the composite. Furthermore, approximately 99% of the nanowires were magnetically separated from the reaction mixture in an external magnetic field. The demonstrated synergy of efficient adsorption–photocatalysis, coupled with easy recovery, suggests that innovatively designed nanomaterials are optimal for the water remediation of organic pollutants in wastewater. © 2024 Elsevier Ltd and Techna Group S.r.l.