Full metadata record

DC Field Value Language
dc.contributor.author Yun, Dongwon ko
dc.contributor.author Kim, Myeong Jin ko
dc.date.accessioned 2021-01-22T07:10:57Z -
dc.date.available 2021-01-22T07:10:57Z -
dc.date.created 2020-06-30 -
dc.date.issued 2020-06 -
dc.identifier.citation Electronics, v.9, no.6, pp.948 -
dc.identifier.issn 2079-9292 -
dc.identifier.uri http://hdl.handle.net/20.500.11750/12696 -
dc.description.abstract Hot embossing is in the spotlight due to the development of electronic devices, wearable devices, microfluidic channels, and optical devices. The conventional hot-embossing process creates a pattern on polymer film by using a previously patterned stamp that applied heat and pressure. This method has a disadvantage because it depends on the shape of the patterned stamp. For this reason, this method requires a high cost and a lot of time when replacing the stamp for making a new pattern shape or for modifying the error of the pattern. To solve this problem, the impact print-type hot-embossing method was proposed to create arbitrary patterns, and equipment for this method was assembled. In addition, patterning experiments were conducted to imprint several tens of micrometer-sized patterns in real time. For this method, we proposed an electromagnetic actuator for making the hot-embossing print type and for reducing the size of the actuator compared to previous studies. Through the patterning experiment, we determined that the proposed device could engrave fine dot patterns ranging from 60 µm to 120 µm in diameter. We verified the size of the generated pattern by using a confocal microscope, and we found the proposed hot-embossing technology can realize the desired shape in any position by using the proposed technique. © 2020 by the authors. Licensee MDPI, Basel, Switzerland. -
dc.language English -
dc.publisher MDPI AG -
dc.title Development of an Electromagnetic Actuator for the Hot-Embossing Process -
dc.type Article -
dc.identifier.doi 10.3390/electronics9060948 -
dc.identifier.wosid 000551115300001 -
dc.identifier.scopusid 2-s2.0-85086258988 -
dc.type.local Article(Overseas) -
dc.type.rims ART -
dc.description.journalClass 1 -
dc.contributor.localauthor Yun, Dongwon -
dc.identifier.citationVolume 9 -
dc.identifier.citationNumber 6 -
dc.identifier.citationStartPage 948 -
dc.identifier.citationTitle Electronics -
dc.type.journalArticle Article -
dc.description.isOpenAccess Y -
dc.subject.keywordAuthor hot embossing -
dc.subject.keywordAuthor free-form patterning -
dc.subject.keywordAuthor impact print-type embossing -
dc.subject.keywordAuthor electromagnetic actuator -
dc.subject.keywordPlus FABRICATION -


qrcode mendeley

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

BROWSE