Cited time in webofscience Cited time in scopus

Full metadata record

DC Field Value Language
dc.contributor.author Doostie, S. -
dc.contributor.author Hoshiar, A.K. -
dc.contributor.author Nazarahari, M. -
dc.contributor.author Lee, Seung Min -
dc.contributor.author Choi, Hong Soo -
dc.date.accessioned 2018-04-11T03:46:15Z -
dc.date.available 2018-04-11T03:46:15Z -
dc.date.created 2018-03-29 -
dc.date.issued 2018-07 -
dc.identifier.citation Precision Engineering, v.53, pp.65 - 78 -
dc.identifier.issn 0141-6359 -
dc.identifier.uri http://hdl.handle.net/20.500.11750/6144 -
dc.description.abstract This paper presents a novel Adaptive Genetic Algorithm for optimal path planning of multiple nanoparticles during the nanomanipulation process. The proposed approach determines the optimal manipulation path in the presence of surface roughness and environment obstacles by considering constraints imposed on the nanomanipulation process. In this research, first by discretizing the environment, an initial set of feasible paths were generated, and then, path optimization was continued in the original continuous environment (and not in the discrete environment). The presented novel approach for path planning in continuous environment (1) makes the algorithm independent of grid size, which is the main limitation in conventional path planning methods, and (2) creates a curve path, instead of piecewise linear one, which increases the accuracy and smoothness of the path considerably. Every path is evaluated based on three factors: the displacement effort (the area under critical force-time diagram during nanomanipulation), surface roughness along the path, and smoothness of the path. Using the weighted linear sum of the mentioned three factors as the objective function provides the opportunity to (1) find a path with optimal value for all factors, (2) increase/decrease the effect of a factor based on process considerations. While the former can be obtained by a simple weight tuning procedure introduced in this paper, the latter can be obtained by increasing/decreasing the weight value associated with a factor. In the case of multiple nanoparticles, a co-evolutionary adaptive algorithm is introduced to find the best destination for each nanoparticle, the best sequence of movement, and optimal path for each nanoparticle. By introducing two new operators, it was shown that the performance of the presented co-evolutionary mechanism outperforms the similar previous works. Finally, the proposed approach was also developed based on a modified Particle Swarm Optimization algorithm, and its performance was compared with the proposed Adaptive Genetic Algorithm. © 2018 Elsevier Inc. -
dc.language English -
dc.publisher Elsevier Inc. -
dc.title Optimal path planning of multiple nanoparticles in continuous environment using a novel Adaptive Genetic Algorithm -
dc.type Article -
dc.identifier.doi 10.1016/j.precisioneng.2018.03.002 -
dc.identifier.wosid 000440122900008 -
dc.identifier.scopusid 2-s2.0-85043277765 -
dc.type.local Article(Overseas) -
dc.type.rims ART -
dc.description.journalClass 1 -
dc.citation.publicationname Precision Engineering -
dc.contributor.nonIdAuthor Doostie, S. -
dc.contributor.nonIdAuthor Hoshiar, A.K. -
dc.contributor.nonIdAuthor Nazarahari, M. -
dc.contributor.nonIdAuthor Lee, Seung Min -
dc.identifier.citationVolume 53 -
dc.identifier.citationStartPage 65 -
dc.identifier.citationEndPage 78 -
dc.identifier.citationTitle Precision Engineering -
dc.type.journalArticle Article -
dc.description.isOpenAccess N -
dc.subject.keywordAuthor Co-evolutionary path planning -
dc.subject.keywordAuthor Nanomanipulation -
dc.subject.keywordAuthor Intelligent path planning -
dc.subject.keywordAuthor Adaptive genetic algorithm -
dc.subject.keywordPlus ATOMIC-FORCE MICROSCOPE -
dc.subject.keywordPlus CONTROLLED MANIPULATION -
dc.subject.keywordPlus SENSITIVITY-ANALYSIS -
dc.subject.keywordPlus MOBILE ROBOTS -
dc.subject.keywordPlus SIMULATION -
dc.subject.keywordPlus AFM -
dc.subject.keywordPlus NANOROBOT -
dc.contributor.affiliatedAuthor Doostie, S. -
dc.contributor.affiliatedAuthor Hoshiar, A.K. -
dc.contributor.affiliatedAuthor Nazarahari, M. -
dc.contributor.affiliatedAuthor Lee, Seung Min -
dc.contributor.affiliatedAuthor Choi, Hong Soo -
Files in This Item:

There are no files associated with this item.

Appears in Collections:
Department of Robotics and Mechatronics Engineering Bio-Micro Robotics Lab 1. Journal Articles

qrcode

  • twitter
  • facebook
  • mendeley

Items in Repository are protected by copyright, with all rights reserved, unless otherwise indicated.

BROWSE