Cited time in webofscience Cited time in scopus

Full metadata record

DC Field Value Language
dc.contributor.author Ketpang, K[Ketpang, Kriangsak] ko
dc.contributor.author Lee, K[Lee, Kibong] ko
dc.contributor.author Shanmugam, S[Shanmugam, Sangaraju] ko
dc.date.available 2017-07-11T06:15:59Z -
dc.date.created 2017-04-10 -
dc.date.issued 2014-10-08 -
dc.identifier.citation ACS Applied Materials and Interfaces, v.6, no.19, pp.16734 - 16744 -
dc.identifier.issn 1944-8244 -
dc.identifier.uri http://hdl.handle.net/20.500.11750/3021 -
dc.description.abstract We describe a facile route to fabricate mesoporous metal oxide (TiO2, CeO2 and ZrO1.95) nanotubes for efficient water retention and migration in a Nafion membrane operated in polymer electrolyte fuel cell under low relative humidity (RH). Porous TiO2 nanotubes (TNT), CeO2 nanotubes (CeNT), and ZrO1.95 (ZrNT) were synthesized by calcining electrospun polyacrylonitrile nanofibers embedded with metal precursors. The nanofibers were prepared using a conventional single spinneret electrospinning technique under an ambient atmosphere. Their porous tubular morphology was observed by SEM and TEM analyses. HR-TEM results revealed a porous metal oxide wall composed of small particles joined together. The mesoporous structure of the samples was analyzed using BET. The tubular morphology and outstanding water absorption ability of the TNT, CeNT, and ZrNT fillers resulted in the effective enhancement of proton conductivity of Nafion composite membranes under both fully humid and dry conditions. Compared to a commercial membrane (Nafion, NRE-212) operated under 100% RH at 80 °C, the Nafion-TNT composite membrane delivered approximately 1.29 times higher current density at 0.6 V. Compared to the Nafion-TiO2 nanoparticles membrane, the Nafion-TNT membrane also generated higher current density at 0.6 V. Additionally, compared to a NRE-212 membrane operated under 50% RH at 80 °C, the Nafion-TNT composite membrane exhibited 3.48 times higher current density at 0.6 V. Under dry conditions (18% RH at 80 °C), the Nafion-TNT, Nafion-CeNT, and Nafion-ZrNT composite membranes exhibited 3.4, 2.4, and 2.9 times higher maximum power density, respectively, than the NRE-212 membrane. The remarkably high performance of the Nafion composite membrane was mainly attributed to the reduction of ohmic resistance by the mesoporous hygroscopic metal oxide nanotubes, which can retain water and effectively enhance water diffusion through the membrane. © 2014 American Chemical Society. -
dc.publisher American Chemical Society -
dc.subject Electrospinning -
dc.subject Mesoporous TiO2 Nanotubes -
dc.subject Metal Oxide -
dc.subject Nafion Composite Membrane -
dc.subject PEFCs -
dc.title Facile Synthesis of Porous Metal Oxide Nanotubes and Modified Nafion Composite Membranes for Polymer Electrolyte Fuel Cells Operated under Low Relative Humidity -
dc.type Article -
dc.identifier.doi 10.1021/am503789d -
dc.identifier.wosid 000343018200033 -
dc.identifier.scopusid 2-s2.0-84907890726 -
dc.type.local Article(Overseas) -
dc.type.rims ART -
dc.description.journalClass 1 -
dc.identifier.citationVolume 6 -
dc.identifier.citationNumber 19 -
dc.identifier.citationStartPage 16734 -
dc.identifier.citationEndPage 16744 -
dc.identifier.citationTitle ACS Applied Materials and Interfaces -
dc.type.journalArticle Article -
dc.contributor.affiliatedAuthor Ketpang, K[Ketpang, Kriangsak] -
dc.contributor.affiliatedAuthor Lee, K[Lee, Kibong] -
dc.contributor.affiliatedAuthor Shanmugam, S[Shanmugam, Sangaraju] -
Files in This Item:

There are no files associated with this item.

Appears in Collections:
Department of Energy Science and Engineering Advanced Energy Materials Laboratory 1. Journal Articles

qrcode

  • twitter
  • facebook
  • mendeley

Items in Repository are protected by copyright, with all rights reserved, unless otherwise indicated.

BROWSE