Khan, Firoz. (2022-08). A comprehensive degradation assessment of silicon photovoltaic modules installed on a concrete base under hot and low-humidity environments: Building applications. Sustainable Energy Technologies and Assessments, 52(C). doi: 10.1016/j.seta.2022.102314
Kim, Suin. (2024-05). Achieving high durability in all-solid-state lithium metal batteries using metal-organic framework solid polymer electrolytes. Journal of Materials Chemistry A, 12(18), 10942–10955. doi: 10.1039/d3ta07184g
Khan, Firoz. (2014-10). Analysis of photovoltaic cell parameters of non-vacuum solution processed Cu(In, Ga)Se-2 thin film based solar cells. Solar Energy, 108, 189–198. doi: 10.1016/j.solener.2014.06.038
Khan, Firoz. (2015-05). Correlation Between Reflectance and Photoluminescent Properties Of Al-rich ZnO Nano-Structures. Metals and Materials International, 21(3), 561–568. doi: 10.1007/s12540-015-4376-z
Khan, Firoz. (2014-01). Dependence of Performance of Si Nanowire Solar Cells on Geometry of the Nanowires. The Scientific World Journal, 2014. doi: 10.1155/2014/358408
Khan, Firoz. (2013-11). Effective passivation of silicon surface by AZO films: Application in bifacial solar cells. Solar Energy, 97, 474–483. doi: 10.1016/j.solener.2013.09.005
Khan, Firoz. (2019-07). Emission-wavelength-dependent photoluminescence decay lifetime of N-functionalized graphene quantum dot downconverters: Impact on conversion efficiency of Cu(In, Ga)Se-2 solar cells. doi: 10.1038/s41598-019-47068-w
Khan, Firoz. (2016-10-15). Enhanced charge transport properties of Ag and Al co-doped ZnO nanostructures via solution process. Journal of Alloys and Compounds, 682, 232–237. doi: 10.1016/j.jallcom.2016.04.292
Khan, Firoz. (2020-02). Enhanced charge-transportation properties of low-temperature processed Al-doped ZnO and its impact on PV cell parameters of organic-inorganic perovskite solar cells. doi: 10.1016/j.sse.2019.107714
Jamal, Hasan. (2021-12). Enhanced compatibility of a polymer-based electrolyte with Li-metal for stable and dendrite-free all-solid-state Li-metal batteries. Journal of Materials Chemistry A, 9(48), 27304–27319. doi: 10.1039/d1ta06886e
Khan, Firoz. (2014-03). Enhanced performance of silicon solar cells by application of low-cost sol-gel-derived Al-rich ZnO film. Solar Energy, 101, 265–271. doi: 10.1016/j.solener.2013.12.025
Jamal, Hasan. (2021-02). Enhancement of the ionic conductivity of a composite polymer electrolyte via surface functionalization of SSZ-13 zeolite for all-solid-state Li-metal batteries. doi: 10.1039/d0ta11218f
Khan, Firoz. (2013-12). Extraction of diode parameters of silicon solar cells under high illumination conditions. Energy Conversion and Management, 76, 421–429. doi: 10.1016/j.enconman.2013.07.054
Lim, Heesoo. (2025-08). Fast Li-ion transport and nonflammable double-layered polymer electrolyte for high-performance Li-metal batteries. Journal of Power Sources, 646. doi: 10.1016/j.jpowsour.2025.237270
Kim, Eunhui. (2023-12). Functionality of 1-Butyl-2,3-Dimethylimidazolium Bromide (BMI-Br) as a Solid Plasticizer in PEO-Based Polymer Electrolyte for Highly Reliable Lithium Metal Batteries. Advanced Energy Materials, 13(47). doi: 10.1002/aenm.202301674
Khan, Firoz. (2022-03). Impact of solvent on the downconversion efficiency of the N-GQDs/PMMA layer: Application in CIGS solar cells. Optik, 253. doi: 10.1016/j.ijleo.2022.168569
Khan, Firoz. (2014-01-25). Influence of Ag doping on structural, optical, and photoluminescence properties of nanostructured AZO films by sol-gel technique. Journal of Alloys and Compounds, 584, 190–194. doi: 10.1016/j.jallcom.2013.09.055
Khan, Firoz. (2014-12). Influence of Al content on surface passivation properties of Al rich ZnO films for solar cell application. Solar Energy, 110, 595–602. doi: 10.1016/j.solener.2014.08.035
Khan, Firoz. (2017-06-30). Influence of oxygen vacancies on surface charge potential and transportation properties of Al-doped ZnO nanostructures produced via atomic layer deposition. Journal of Alloys and Compounds, 709, 819–828. doi: 10.1016/j.jallcom.2017.03.133
Khan, Firoz. (2023-01). Influence of synthesis parameters of N-doped graphene quantum dots and polymer composite layer on the performance of CIGS solar cells. Optical Materials, 135. doi: 10.1016/j.optmat.2022.113251
Khan, Firoz. (2014-11-15). Intensity dependency of photovoltaic cell parameters under high illumination conditions: An analysis. Applied Energy, 133, 356–362. doi: 10.1016/j.apenergy.2014.07.107
Khan, Firoz. (2016). Investigation of the surface passivation mechanism through an Ag-doped Al-rich film using a solution process. Nanoscale, 8(2), 1007–1014. doi: 10.1039/c5nr06883e
Khan, Firoz. (2018-11). N-Functionalized Graphene Quantum Dots with Ultrahigh Quantum Yield and Large Stokes Shift: Efficient Downconverters for CIGS Solar Cells. doi: 10.1021/acsphotonics.8b01125
Khan, Firoz. (2019-08). N-functionalized graphene quantum dots: Charge transporting layer for high-rate and durable Li 4 Ti 5 O 12 -based Li-ion battery. doi: 10.1016/j.cej.2019.03.161
Khan, Firoz. (2016-11-01). Novel approach for fabrication of buried contact silicon nanowire solar cells with improved performance. Solar Energy, 137, 122–128. doi: 10.1016/j.solener.2016.08.010
Khan, Firoz. (2016-04). One-step and controllable bipolar doping of reduced graphene oxide using TMAH as reducing agent and doping source for field effect transistors. Carbon, 100, 608–616. doi: 10.1016/j.carbon.2016.01.064
Khan, Firoz. (2015-01). Passivation analysis of silicon surfaces via sol-gel derived Al-rich ZnO film. Semiconductor Science and Technology, 30(1). doi: 10.1088/0268-1242/30/1/015012
Khan, Firoz. (2019-12). Performance Degradation Analysis of c-Si PV Modules Mounted on a Concrete Slab under Hot-Humid Conditions Using Electroluminescence Scanning Technique for Potential Utilization in Future Solar Roadways. Materials, 12(24), 4047. doi: 10.3390/ma12244047
Khan, Firoz. (2020-01). Reliability Study of c-Si PV Module Mounted on a Concrete Slab by Thermal Cycling Using Electroluminescence Scanning: Application in Future Solar Roadways. Materials, 13(2), 470. doi: 10.3390/ma13020470
Jamal, Hasan. (2023-04). Restraining lithium dendrite formation in all-solid-state Li-metal batteries via the surface modification of the ceramic filler. Sustainable Materials and Technologies, 35, e00548. doi: 10.1016/j.susmat.2022.e00548
Khan, Firoz. (2018-12). Significance of N-moieties in regulating the electrochemical properties of nano-porous graphene: Toward highly capacitive energy storage devices. Journal of Industrial and Engineering Chemistry, 68, 129–139. doi: 10.1016/j.jiec.2018.07.037
Khan, Firoz. (2016-12-01). Wide range temperature dependence of analytical photovoltaic cell parameters for silicon solar cells under high illumination conditions. Applied Energy, 183, 715–724. doi: 10.1016/j.apenergy.2016.09.020
Khan, Firoz. (2015-10-25). Work function tuning and fluorescence enhancement of hydrogen annealed Ag-doped Al-rich zinc oxide nanostructures using a sol-gel process. Journal of Alloys and Compounds, 647, 566–572. doi: 10.1016/j.jallcom.2015.05.243
